Basic House Kit |
This is a good starter kit to try your hand at 1:144. It has six standard rooms and three attic areas. It is suitable for putting in a little girl’s room of a 1:12 scale dollhouse, or can be displayed as a stand alone 1:144 house. The engraving on the walls and floors is to show you at a glance, where your wallpaper and/or paint need(s) to be and for the placement of parts. $29.50 |
|
|
|
Boot Kit |
This is a fun little 1:144 kit, which is easy to make and requires only a few pieces of furniture to complete the two rooms and patio area. It is a good beginner’s kit to try your hand at 1:144. It could be displayed in a 1:12 scale dollhouse or as a stand alone piece. The engraving on the walls and floors is to show you at a glance, where your wallpaper and/or paint need(s) to be and for the placement of parts during assembly. $25.00
|
|
|
|
Spectacle Mall Kit |
This is a comical little 1:144 kit, which is an idea that is based on using a spectacle/glasses frame as the front to this three shop mall. It has an outside pavement area where tables and chairs can be placed. Your mall shops can have names relating to eyes, spectacles, or whatever theme you like. It is an easy kit to assemble and all doors and windows are supplied. The completed mall could be displayed in a 1:12 scale dollhouse or as a stand alone piece. $25.00
|
|
|
|
Billabong Pub Kit |
This is a fun little 1:144 structure kit, which is not difficult to make even though it has lots of odd angles, but it can be a little tricky! It could be displayed in a 1:12 scale dollhouse or as a stand alone piece. The engraving on the walls and floors is to show you at a glance, where wallpaper and/or paint need(s) to be and for the placement of parts during assembly. $65.00
|
|
|
Cars will not be included in the kit, but can be purchased separately at $1.00 each!
|
Baby House - Roombox kit inserts |
Pictured is a Baby House made in China. The pictures show the BH fitted with laser cut room boxes. This allows for the rooms to be changed. There is a front panel/overlay which covers the edges and gives a nice tidy finish. Room boxes (flat pack)and the overlay can be bought as single items, or as a Set (6 x Roombox kits and 1 x overlay. Prices are as follows: Roombox only - US$2.50 each.
Overlay only - $4.00 each.
Set of 6 Roomboxes and 1 overlay $16.00 + S & H (to US is $3.00)
|
NB. All room openings in this Baby House - Chinese made, and bought in Australia - are 45mm x 28mm and that is the size of the boxes. If the openings on yours are smaller, or larger, then the roomboxes won't fit and the overlay certainly won't fit!
|
Front Overlay
|
Roombox
|
|
#1. Shop Facade and Roombox Kit.
This 1:144 kit includes the unpainted laser cut parts for the pictured shop facade and a roombox like the ones for the babyhouse above.
$5.00
|
|
#2. Shop Facade and Roombox Kit
This 1:144 kit includes the unpainted laser cut parts for the pictured shop facade and the roombox like the ones for the babyhouse above.
$5.00
|
|
#3. Shop Facade and Roombox Kit
This 1:144 kit includes the unpainted laser cut parts for the pictured shop facade and the roombox like the ones for the babyhouse above..
$5.00
|
|
#4. Shop Facade and Roombox Kit
This 1:144 kit includes the unpainted laser cut parts for the pictured shop facade and the roombox like the ones for the babyhouse above.
$5.00
|
|
#5. Shop Facade and Roombox Kit
This 1:144 kit includes the unpainted laser cut parts for the pictured shop facade and the roombox like the ones for the babyhouse above.
$5.00
|
| |
| |
"Innisfail" Cottage Kit |
Below is a picture of the combination of the two Innisfail Kits - 'Cottage' and 'House'. These will be sold in two separate kits, but if purchasing the two, the enclosed skillion section in the middle will be included. If purchasing only one of the kits then the skillion section will not be included.
$70.00
|
|
|
"Innisfail" House Kit |
Innisfail Homestead (the combination of the cottage and the house) was where my four brothers and I were born and raised. It was originally owned by my grandparents - on my mother's side - but after WW2 the property was divided up into seven Soldier Settlement blocks and my mother and father got the Homestead block. Unfortunately the homestead was burnt to the ground in 1972. All but my youngest brother, who was in High School, were out in the workforce and mostly living elsewhere at the time of the fire.
$110.00
|
"Innisfail" Add-on, or joining kit. This kit enables the 'Cottage' and 'House' to be joined together to form the complete "Innisfail Homestead".
$10.00 |
| When all three kits are purchased together the total price will be $170 |
"Araluen Cottage" Kit - Still Coming! |
|
|
|
|
The model pictured is the original prototype and doesn't have the windows and doors fitted. They are supplied in the kit.
I lived in the real Araluen Cottage - a fettlers's cottage built round 1920 - for about 18years, until 2004. The side walls will be a frame with a large window to each room so that they can be viewed without having to leave the roof removable. The frames can be left removable for easy changing of pieces within the rooms.
|
|
Introductory price: $49.50 |
| Hopefully I will have it available sometime in 2012! |
'Tylden Townhouse' Kit - Coming! |
|
|
|
|
Tylden Townhouse is a two story modern style terrace house. Terrace houses in Sydney typically came in blocks (six or more attached to one another), and they are similar to the row houses of the US. It will come with stairs (not shown) to the left or right. A series of townhouses could then be built in differing styles/colour schemes and placed side by side to form a whole block. They will have framed side walls to form large windows to each room. It comes complete with all doors - internal and external - and windows for front and back. Floors and walls are engraved as a guide for painting and/or placement of printies, and for ease of setting the walls in place.
|
Hopefully will be available sometime in 2012 |
Introductory price will be $59 |
